Expanding Rock Anchor HDG | Wedge Type Guy Anchor | Yokelink

Q1: How does an Expanding Rock Anchor hold tension without concrete or grout?

A: The holding power comes entirely from mechanical friction and wedging action. At the bottom of the rod is a tapered plug surrounded by two or three ribbed steel wedges. When you turn the anchor rod, the plug moves up the threads, forcing the wedges outward. The ribs on the wedges bite intensely into the walls of the drilled rock hole, creating a secure lock that resists massive pull-out forces.

Q2: What happens if the drilled rock hole is too large?

A: Precision drilling is critical. If the hole diameter is even slightly larger than the manufacturer's specification (e.g., drilling a 2" hole for a 1-3/4" rock anchor), the wedges will reach their maximum expansion limit before they can firmly grip the rock walls. The anchor will simply slip out when tension is applied. Always use the exact drill bit size required.

Q3: Can I use an Expanding Rock Anchor in cracked or weathered rock?

A: It is highly discouraged. Mechanical rock anchors require solid, unyielding rock to push against. If the rock is fractured, weathered, or soft (like shale), the pressure of the expanding wedges will simply crack the rock further, resulting in anchor failure. In fractured rock conditions, grouted anchors are generally required.

Q4: Do I need to grout a mechanical expanding rock anchor after installation?

A: While the mechanical expansion provides the primary holding power, many utility specifications require the drilled hole to be filled with grout after the anchor is expanded. Grouting serves two purposes: it prevents water from pooling in the hole and freezing (which could fracture the rock), and it adds a secondary layer of severe corrosion protection for the galvanized rod.

Q5: How do you know when the rock anchor is fully expanded and secure?

A: During installation, you insert a heavy bar through the forged eye of the anchor and turn it clockwise. You will feel increasing resistance as the wedges dig into the rock. The anchor is fully set when the rod can no longer be turned by the bar under normal manual force, ensuring the wedges are solidly locked against the rock walls.

Reference Information:

https://www.yokelink.com/news/pole-line-hardware-drop-forged-hot-dipped-galvanized-anchor-rod-336204.html